 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Furnace trouble
This summer I was running the a/c and one day it tripped the breaker. I checked the thermostat and the a/c unit itself but both seemed fine. It trips the breaker as soon as it starts to blow the air out. Now when I run the heat it does the same thing except now it gives me a code to check the limit switch. Could the limit switch cause the breaker to trip? I tried removing the filter in case it wasn't getting good air flow. And I checked the breaker. It's a 1998 lennox furnace/ac. Any suggestions?
|
||||
Check out some similar questions!
My coleman furnace heating coils heat (get red) and then go off and come on go off, I don't see no breaks in them what could cause this? Thank you.
I have a Goodman CAPF036A2A furnace, the gas is not going through the regulator?
I am new hear forgive me if this is not posted correctly but I am about to take a wrench and whack the heck out of my furnace!! Here is the history (briefly at any rate) Two days before Thanksgiving we finally decided to turn her on she is 12 years old, I believe the brand is Valiant (?) well she...
My beach 68/70 oil furnace cuts in and out 4or5 times after the cycle an sometimes will keep running
About a month ago I put in a new thermocoupler in my furnce and it's been working fine. This morning I woke up to no heat. I can re-light the pilot with no problems. The piot light keeps on burning if I don't turn the thermostat up to turn on the furnace. Then when I set the thermostat to 70...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
