Ask Experts Questions for FREE Help !
Ask
    barkway man's Avatar
    barkway man Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 8, 2008, 08:50 AM
    Furnace trouble
    My beach 68/70 oil furnace cuts in and out 4or5 times after the cycle an sometimes will keep running
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 8, 2008, 08:58 AM
    4or5 times after the cycle an sometimes will keep running?

    What cycle and when during the cycle.

    Do you hit the reset to get it to start again?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trouble shooting GMP Furnace [ 1 Answers ]

I have a gmp075-4 gas fired furnace, I just replaced the gas valve and the thing starts up fine but when the burner fires and the hot bar goes out the burner goes out any ideas? Limit switch maybe ?

Gas furnace pilot trouble. Goes out while furnace is running! [ 1 Answers ]

About a month ago I put in a new thermocoupler in my furnce and it's been working fine. This morning I woke up to no heat. I can re-light the pilot with no problems. The piot light keeps on burning if I don't turn the thermostat up to turn on the furnace. Then when I set the thermostat to 70...

Furnace trouble [ 5 Answers ]

Our furnace will work for about 2-3 hours fine, then it will act up, it will click on but the Fan will not turn on to get furnace working, it sits there clicking and clicking, we then have To turn off for about one hour.. then turn it on again , this time it works for another 3-4 Hours or 5-6...

View more questions Search