Ask Experts Questions for FREE Help !
Ask
    pluffmud's Avatar
    pluffmud Posts: 3, Reputation: 1
    New Member
     
    #1

    Oct 3, 2011, 02:53 PM
    Bryant unit: no heat, light blinking eight times
    I have a bryant model 589anw030080acbd model heater/a.c unit... I have two major problems 1.) the heat won't turn on. I took off the lid, and the red light blinks 8 times. Does anybody know where to find the diagnostic translation for eight blinks.
    2.) after a recent power outage (about a week ago), the unit came back on, but the fan WILL NOT shut off even when the ac isn't on. Basically, it's the same as if I turned the switch on the thermostat to "ON"; the ac shuts off, but the fan stays blowing 24/7.
    I'm not sure if the two problems are related. Any help would be appreciated. Thanks in advance
    pluffmud's Avatar
    pluffmud Posts: 3, Reputation: 1
    New Member
     
    #2

    Oct 3, 2011, 03:00 PM
    Hey, I should add an update: just found the diagnostic code answer for eight blinks: apparently it's an "Internal Code Fault". So now what do I do? Is this a major or minor problem?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

York furnace 90 plus blinking light 3 times [ 3 Answers ]

I have a York 90 plus furnace, the red light was blinking 3 times, I pulled the wires off the condesation pressure swithch and placed a jumper in the wires the blinking lights stopped and the furance kicked on, can I leave the jumper in till it get the part?? Is it safe to do leave the jumper in??

Nordyne furnace red light blinking three times [ 0 Answers ]

I have a nordyne furnace and its not working a red light is blinking three times and I need to know what is wrong soon have a two month old

Trane xl80 blinking red light 3 times what does this mean? [ 0 Answers ]

Trane XL 80 blinking red light 3 times? What would this indicate?

Concord 95% light blinking 3 times what are the possible causes to create the problem [ 1 Answers ]

I just installed a concord 80,000 95% furnace, now I am getting a blinking light 3 times, if I jump the pressure sensor wires it works fine what are my possible problems


View more questions Search