Ask Experts Questions for FREE Help !
Ask
    sphuddle's Avatar
    sphuddle Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 3, 2011, 08:07 AM
    Igniter fails to light gas
    It seems that the igniter will glow three times before the gas will ignite.
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #2

    Oct 3, 2011, 08:42 AM
    We need a lot more information than the statement you made.

    Have the burners been cleaned? Are they properly adjusted?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Igniter won't fire blower comes on and then gas but not igniter, status light on [ 0 Answers ]

Not voltage in the igniter of my gas heater, that I can do [ 2 Answers ]

Not voltage in the igniter of my gas heater, that I can do

Bryant Gas Furnace fails to ignite [ 3 Answers ]

My Bryant Gas Furnace occasionally fails to ignite. When this happens, I can reset it by turning the switch by the furnace off and on. It will then ignite after sparking for 30 seconds or so. The furnace has a pilot that is on and becomes large when the thermostat directs it to, but after sparking...

Furnace igniter fails to fire [ 2 Answers ]

The furnace igniter fails to fully light the furnace. If I turn off the frurnace, then the igniter will fully work properly. Does theigniter need to be replaced?

View more questions Search