Ask Experts Questions for FREE Help !
Ask
    mikidee's Avatar
    mikidee Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 28, 2011, 07:43 AM
    Kenmore ultra wash 2 dishwasher died mid cycle
    My kenmore ultra wash 2 dishwasher model # 665-1563590 died right before the rinse and hold cycle. The bottom is full of water still. Nothing is working. It has no power. We checked circuit breakers, turned them off for 10 min etc, will not restart. Trying to follow some of the fixes here but our unit does not have a heat dry. The buttons are pots/pans, normal wash, rinse/hold. Other set of buttons are air dry, water heat and reset options. There are no lights of any kind. (it is an old model that came with house) Not even sure if it is 220 or 110 as it is direct wired (no plug) Assuming it is 220. Does it sound like new dishwasher time? Would like to get the darn thing to drain though... Thanks for any help.

    Dishwasherless in Texas
    twinkiedooter's Avatar
    twinkiedooter Posts: 12,172, Reputation: 1054
    Uber Member
    		  
    #2

    Sep 28, 2011, 08:42 AM
    Sounds like the motor died. You may have to manually bail out the water in the bottom of the machine for now.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore elite ultra wash dishwasher quiet guard 7 with the turbo wash. [ 1 Answers ]

I have a kenmore elite ultra wash dishwasher quiet guard 7 with the turbo wash. The middle spray arm has stopped spinning. I changed the feed tube going up to the arm, but to no avail. The feeder tube assemble didn't come with the Turbo section. I checked the water level and it seems adequate and I...

Kenmore Ultra Wash Dishwasher - flashing normal wash and Cancel lights? [ 1 Answers ]

Kenmore Ultra Wash Dishwasher - flashing normal wash and Cancel lights? Is there any easy fix to the flashing lights? I have the "normal wash" and "Cancel" lights flashing. The dishwasher does not work. Model: 665.1385

Sears Ultra Dishwasher Won't Spray on Wash Cycle [ 1 Answers ]

I have a Sears Ultra Dishwasher that just stopped spraying on the wash cycle. Everything seems to work except there's no water spraying through the arms when the wash cycle is active. There is water in the bottom and the drain cycle works fine, too. Does this have an obvious answer? Thanks for any...

Kenmore ultra wash quiet guard deluxe dishwasher is stuck in wash cycle [ 2 Answers ]

I got a kenmore ultra wash quiet guard deluxe dishwasher for Christmas. My husband installed it and it seems like it is stuck in the wash cycle. It ran for an hour and a half and it never drained, so we finally shut it off. Any suggestions?

Kenmore Ultra Wash Dishwasher [ 1 Answers ]

My dishwasher's lights are all working but no water is dispensing to begin the wash cycle. The soap dispenser lid pops open like everything is all good, but not one single drop of water is inside the dishwasher - any ideas? The unit is approximately 5 years old and a new motor was put in it last...

View more questions Search