My kenmore ultra wash 2 dishwasher model # 665-1563590 died right before the rinse and hold cycle. The bottom is full of water still. Nothing is working. It has no power. We checked circuit breakers, turned them off for 10 min etc, will not restart. Trying to follow some of the fixes here but our unit does not have a heat dry. The buttons are pots/pans, normal wash, rinse/hold. Other set of buttons are air dry, water heat and reset options. There are no lights of any kind. (it is an old model that came with house) Not even sure if it is 220 or 110 as it is direct wired (no plug) Assuming it is 220. Does it sound like new dishwasher time? Would like to get the darn thing to drain though... Thanks for any help.

Dishwasherless in Texas

Sounds like the motor died. You may have to manually bail out the water in the bottom of the machine for now.