Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Furnace a/c furnace fan stops as soon as compressor stops?
[ 1 Answers ]
I have an Armstrong sx90 gas furnace w a/c. The furnace circulating fan quit operating. The tech replaced the circuit board (part no 40403001) which had a burnt diode. Now the fan operatesin all functions, but stops as soon as the compressor stops. It used to run on for a minute or two after...
Blower fan runs and stops runs and stops
[ 4 Answers ]
I have a heil system and when it is on Heat or Cool the blower runs for about a min and then stops for a min. And continues running like that. The main system that is outside (condenser I quess its called?) keeps running. It is just the blower in the furnace in the garage. I had a company look at...
Condenser fan not spining, contacts pull in and there is a humming,
[ 1 Answers ]
Condenser fan motor not spining, fan blades move easily, contacts pull in and there is a humming, compressor starts heating up, is it the capacitor? Rheem residential unit
Fan works and then stops and my outside air unit gets hot
[ 7 Answers ]
I have a unit that is a Janitrol and is about 15 yrs old. I just had a new compressor put in but the unit stopped blowing cold air after a day. The man came back and found two leaks that caused all the freon to leak out. He fixed the leaks and put more gas in it. He has not been gone for a...
PVC Pipe Leakage, furnace Fan Does Not Stop, Blower Fan Works for 5 MIN and stops
[ 1 Answers ]
1) I had water DRAINING from the furnace in the attic... it overflowed... the pan under furnace was beyond full. 2) I noticed leakage from one of the PVC pipes. 3) I simply replace the PVC pipe where water was leaking, but I forgot to put the PVC CEMENT. 4) I went to turn of the AC... View more questions Search
|