Bryant n coil

jasmarie1 Posts: 57, Reputation: 0

Junior Member

Sep 4, 2011, 11:42 AM

Bryant n coil

Can a bryant n coil 410a 3.5 ton be use in a rheem 3.5 ton 410a condenser

T-Top Posts: 1,871, Reputation: 100

Ultra Member

Sep 4, 2011, 01:54 PM

Yes with out any problems as long each one was set up for 410a.

Add your answer here.

Check out some similar questions!

On coil and off coil temperatures of AHU [ 0 Answers ]

What is the meaning of on coil and off coil temperatures of AHU and how can I measure these parameters

Converting an R22 A-Coil To a Water to Air Coil? [ 8 Answers ]

Converting an R22 A-Coil To a Water to Air Coil A friend of mine has a water to water geothermal unit for heating his home. He wants to use this same unit for cooling the house. Looking at water to air coils the prices are quite steep compared to the standard run of the mill A-Coils. We are...

Replacing a 4 ton A-coil to a equivalent coil? [ 12 Answers ]

I have a TRANE 4 TON unit heat pump system model #TWE048c140B3 and my A coil went out and is pretty rusted. I am looking to replace the A-coil with an equivalent A-coil to get me going again until I can change out the entire unit. I know that I don't have to go back with a TRANE A-COIL and that I...

New Outside Condsing Unit, Bad indoor Coil - Go with Heat Pump or Buy New Coil? [ 7 Answers ]

Hi All, Here is my issue. Recently, our home warranty company paid to replace a 25 year old 7 SEER Borg Warner outside unit, but swore up and down that the indoor Borg Warner Coil would be OK with the new 10 SEER Carrier. We no longer have this home warranty company and they are not standing...