 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Circuit breaker goes out on dishwasher in Rinse and hold cycle
We have had this problem with the circuit going out for a long time. The dishwasher is kitchenaid KUD1230B. The breaker is rated for 20 amp the unit says it draws max 12.5. When you get to the rinse and hold cycle it throws the breaker. Not sure if it is the unit or electric supply. And way to confirm before proceeding? You hit the circuit breaker after it throws it and you reset there is usually not any other problem. Could it be when it goes to rinse and hold I'm coming to the problem? What would be probable causes. I'm thinking when it goes to next cycle something is not right? Don't have a clue other than info given.
My guess is there is a transfer at this point but I don't know how to pin point problem area. |
||||
Check out some similar questions!
Started with dishes on top rack not cleaning well (an issue that a repairman fixed a few months ago by clearing seed debris from the internal machinery). The next day the washer stopped completely, with a flashing green clean light. Unplugging, and then plugging it back on didn't help. A call to...
My Kenmore dishwasher will only start a cycle after I have reset the dishwater by flipping the breaker, what can I do to fix it?
My Whirlpool dishwasher only runs the quick rinse cycle no matter which button is pressed. I have changed the electronics board and tried two different user interface boards. Any ideas? Or does anyone know where I can get a schematic for the interface board? Thanks, Tom
Whenever I plug in my electric heater on one side of my house it knocks out the circuit breaker.Is it possible to add another breaker panel in the box or increase the size of the panel in the box? The panels in the box are 15amps, what is the next largest size iI can increase it to?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
