Not your question?
  Ask your question
  View similar questions
   
  
 Add your answer here.Check out some similar questions!
Shower Drain Question
 [ 6 Answers ]
 I am putting in a bathroom in my basement. It is new construction and has the bath already roughed in for a sink, toilet and shower. The shower drain is about 14" away from where it actually needs to be (not sure what the builder was thinking). I have already demoed the concrete from the... 
Baby Shower Question
 [ 1 Answers ]
 Hi all, I am in a bit of a pickle here. I am throwing a baby shower for a close friend of mine and another friend of hers was going to help me. However, I have never heard from her, I have called twice and e-mailed 4 or 5 times with no luck. Now the invites need to go out. My question is... can... 
Shower pressure Question
 [ 5 Answers ]
 I have an older 3 knob shower system- hot cold and a diverter than turns(not on the spout). When I turn on the hot and cold water a lot of water is coming out of the spout. When I turn the diverter for the shower the water pressure is somewhat light. From the amount of water coming out of the... 
Plumbing question for new shower
 [ 1 Answers ]
 Hi, Looking for some advice on plumbing the drain on a Schluter-Kerdi shower system. I am a pretty confident DIY’er, but almost contracted this out until I found these great web sites! I am replacing an existing 3’x5’ tub with an already purchased Schluter-Kerdi system (which requires the... 
Shower question
 [ 2 Answers ]
 
Hello. I have a townhouse in VA with an unfinished basement that I am trying to finish with a 3/4 bathroom. I have a rough in for a toilet and a sink, but none for a shower yet. There is also a 2" floor drain. The floor drain, toilet, and sink all use the same vent (I think). I would like to... View more questions Search 
  |