Ask Experts Questions for FREE Help !
Ask
    connellyt's Avatar
    connellyt Posts: 2, Reputation: 1
    New Member
     
    #1

    Feb 12, 2005, 03:41 PM
    Shower question
    Hello. I have a townhouse in VA with an unfinished basement that I am trying to finish with a 3/4 bathroom. I have a rough in for a toilet and a sink, but none for a shower yet. There is also a 2" floor drain. The floor drain, toilet, and sink all use the same vent (I think).

    I would like to add a shower when I finish the basement. I was wondering if it would meet code to drain the shower into the floor drain? I was thinking I could raise the shower base about 3" and use 1.5" pipe to the floor drain, and then use the P trap already in the floor drain. It's 36" from where the shower drain will be to the floor drain. The only thing using the floor drain now is the air conditioning condenser and the whole house humidifier. The floor drain connects to the main sewage line. (If I do this can I run the humidifier and A/C drain line to the sump pump, or even keep them connected to the floor drain?)

    A second option is to raise the shower about 6" and connect to a 3" pipe that comes down from the first floor and goes into the concrete floor. It is about 20" to the 3" pipe from where the shower drain will be located. I know I would still have to vent this before the connection.

    My last option is to have someone break the concrete and install a rough in. While I know this is probably the preferred method I would have to put off finishing the bathroom part of my basement for about a year if I did this in order to hire a plumber, and I would prefer to finish sooner rather than later.

    Thanks in advance.

    Tom
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Feb 12, 2005, 05:02 PM
    Shower question
    Quote Originally Posted by connellyt
    Hello. I have a townhouse in VA with an unfinished basement that I am trying to finish with a 3/4 bathroom. I have a rough in for a toilet and a sink, but none for a shower yet. There is also a 2" floor drain. The floor drain, toilet, and sink all use the same vent (I think).

    I would like to add a shower when I finish the basement. I was wondering if it would meet code to drain the shower into the floor drain? I was thinking I could raise the shower base about 3" and use 1.5" pipe to the floor drain, and then use the P trap already in the floor drain. It's 36" from where the shower drain will be to the floor drain. The only thing using the floor drain now is the air conditioning condenser and the whole house humidifier. The floor drain connects to the main sewage line. (If I do this can I run the humidifier and A/C drain line to the sump pump, or even keep them connected to the floor drain?)

    A second option is to raise the shower about 6" and connect to a 3" pipe that comes down from the first floor and goes into the concrete floor. It is about 20" to the 3" pipe from where the shower drain will be located. I know I would still have to vent this before the connection.

    My last option is to have someone break the concrete and install a rough in. While I know this is probably the preferred method I would have to put off finishing the bathroom part of my basement for about a year if I did this in order to hire a plumber, and I would prefer to finish sooner rather than later.

    Thanks in advance.

    Tom
    Let me give you still another option. (you can never have too many options).
    When we lived up north we had the same situation in our basement. My father chose the easiest out. He used the floor drain and the sloped floor as the shower base. After he installed the shower valve and spray He then ran a half circle chrome shower rod around the shower, anchored it to the walls and enclosed it with a shower curtain. We used that basement shower until we moved to Florida. No walls took out, no floor jackhammered up and no problem in water pipeing since the pipes and valve were strapped and exposed. Just a suggestion. Regards, Tom
    connellyt's Avatar
    connellyt Posts: 2, Reputation: 1
    New Member
     
    #3

    Feb 15, 2005, 05:37 PM
    I appreciate the other option, but unfortunately, the floor drain is too close to the rough in for me to use it like that. It's only about 18 inches from the toilet rough in. Once I put up a wall between that and the toilet rough in, most of my space is gone.

    I think I'll end up breaking the concrete. If I'm going to do it, I guess I should do it once, and right the first time.

    Thanks.
    Tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Shower Pan Question from a Newbie [ 2 Answers ]

I have a shower that is tiled on three sides and has a fiberglass pan. The pan has peeled and has had 2 do it yourself paint jobs from Home Depot kits. It also has two cracks coming out from the drain about 5 inches long. I had a pro out to refinish it and he said that because of the extent of...

Shower spout question... [ 11 Answers ]

Hi all, This is a great form! I did a search and read as much as I could but I still have a few questions that I would appreciate your expertise and comments: - My bath tub shower spout looks like this one: Remodeling : Replace a Bathtub Spout : Home & Garden Television The lever pulls up...

Shower Pan Replacement Question [ 1 Answers ]

I am replacing an old shower pan with a fiberglass unit. I believe the old pan is acrylic. There is a large opening in the slab for the trap, approx 12" x 12". There will be no support for the part of the pan that's directly above this cutout. Is the fiberglass shower pan strong enough to not...

Shower pressure Question [ 5 Answers ]

I have an older 3 knob shower system- hot cold and a diverter than turns(not on the spout). When I turn on the hot and cold water a lot of water is coming out of the spout. When I turn the diverter for the shower the water pressure is somewhat light. From the amount of water coming out of the...

Plumbing question for new shower [ 1 Answers ]

Hi, Looking for some advice on plumbing the drain on a Schluter-Kerdi shower system. I am a pretty confident DIY’er, but almost contracted this out until I found these great web sites! I am replacing an existing 3’x5’ tub with an already purchased Schluter-Kerdi system (which requires the...


View more questions Search