Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Arc fault breaker
[ 9 Answers ]
As some of you might remember, I have knob and tube in my house. I just had a new panel installed, but the knob and tube remains. I am in the process to change that over, but in the meantime, would an AFCI breaker protect from arcs that might happen in the wall cavity? My wife heard a story of a...
Re-setting Arc Fault Breaker
[ 2 Answers ]
After an electrical storm where elec service was interupted I can not re-set the two Bedroom Arc Fault Breakers. Breakers are mfd by Eaton & has small yellow test button on each. Says type BYAF. All else is well. Home is 1 year old in Florida. Please help.
Arc Fault Breaker Questions
[ 3 Answers ]
I have a house built in 1950 and I am upgrading the fuse box to one with breakers. Thanks for your answers in advance. My question is do you recommend using ARC FAULT breakers for all the old wiring? I know it will cost me more but the wiring is old. Does an ARC FAULT breaker also do the job...
Arc fault breaker wiring
[ 1 Answers ]
Can I power two arc fault protected circuits through one 14-3 feeder? I intend to install two arc fault breakers in the panel and route the power to two bedrooms through a single run of 14-3 cable.
ARC Breaker troubleshoot.
[ 10 Answers ]
I was removing a small Sony cd player in master bedroom. It made a short/ spark, circuit breaker went off. Removed cd player; Went to pannel and turn on /reset breaker for Masterbderoom; I made a mistake by reset the next AFCI breaker which is for bedroom2 (dont know why,may be itchy finger :o )! ... View more questions Search
|