Ask Experts Questions for FREE Help !
Ask
    mkhdsn's Avatar
    mkhdsn Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 25, 2011, 04:55 PM
    I have a lennox elite series 12 gcs
    The compressor kicks on but fan doesn't. I noticed the fan housing and bolts that hold it to the unit are extremely hot. I the fan motor out or could one of the round cylinder fuses in the fuse box by the unit out?

Check out some similar questions!

Lennox furnace elite series [ 4 Answers ]

Problem with Lennox Elite Series... Burners will start but blower motor will not... can you cast any light on the subject... Thanks signed... Cold Chicagoan

Free help lennox elite series a/c [ 0 Answers ]

On the lennox elite a/c heat pump, replaced burned blower motor, replaced relay control unit . It will start the blower when the outside unit is kicking in the relay starts sparking

Does the Lennox elite series have fuses [ 1 Answers ]

Deos the Lennox Elite Series compressor have a fuse box?

I have a lennox elite series and the burners are failing to ignite, what can I do [ 1 Answers ]

I have a Lennox Elite Series sure light and the burners are failing to ignite, what can I do? I have replaced the filter, I have ensured there are no clogs...

Lennox elite series gas furnace [ 0 Answers ]

I set the thermostat at 70 degrees,the house is currently 63 degrees... the heater comes on, I see the flame and hear the blower,but it will only work for 2 minutes at a time.I cahnged the battries in theHoneywell electric thermostat but there was no change. Is there a way to troubleshoot(other...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.