 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Lennox elite series gas furnace
I set the thermostat at 70 degrees,the house is currently 63 degrees... the heater comes on, I see the flame and hear the blower,but it will only work for 2 minutes at a time.I cahnged the battries in theHoneywell electric thermostat but there was no change. Is there a way to troubleshoot(other than the things I just mentioned) before I call a repairman?
|
||||
Check out some similar questions!
Hi, I have a Lennox Elite Series HS29-030-1P air conditioning unit and the compressor will not start. You will hear a buzzing sound then it stops, it about a minute it tries again then stops. What are the best ways to test the starter cap and the compressor to isolate the problem. The starter...
My LENNOX Gas Furnace-High Efficiency G51MP Series is 2 years old. The furnace used to work perfectly. 4 Days ago I started having a problem with it. We woke up in the middle of the night and the house is very cold. The thermostat is set to 72°F and it was reading 66°F. The furnace was running but...
Problem with Lennox Elite Series... Burners will start but blower motor will not... can you cast any light on the subject... Thanks signed... Cold Chicagoan
I need to change my blower speed on a lennox elite furnace. How to set up wires for slower speed
Our touch screen thermostat is very loud when it shuts on and off. I know this is due to the electrical relay but I am wondering if a different model would be quieter.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
