 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Ruud ugph 07 mother board problems?
Blower fan runs all the time, when power is turned off and back on inducer fan starts heat start up cycle. Universal board has repeating 6 red flashes which is indicator for open roll out switch. Have continuity on them. This is happening no matter what the thermostat is set to- heat, cool, or off. Am not getting cool call at condenser when switched to cool. Second board replacement in 2 years even though they worked fine for approx. 1 year on first replacement board and 10 months. On second. As far as I can recall they both malfunctioned in the same way both times
|
||||
Check out some similar questions!
I have a Ruud high efficiency furnace that's giving me fits. The problems started a few weeks ago when I woke up to a cold house. I reset the breaker, it wasn't tripped and the unit seemed to work as it should for a few days, then it happened again. I checked and reseated all the electrical...
I have changed the igniter, circuit board and the hot surface module but it still will not light Ihave tested pressure switches and the appear to be working any help would be great furnace is a ruud model UGEB-10EE-GS
Circuit board led has two quick blinks and pauses so on and so on
I have a gateway computer. The power source went out on it and I replaced it. When I power up the tower all that comes up on the screen is the name gateway. My power source works, but my keyboard, mouse and any attatchment do not work. Is this the mother board? Looking for some advise. Thank you,:D
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
