Ask Experts Questions for FREE Help !
Ask
    ampitup's Avatar
    ampitup Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 10, 2011, 08:21 PM
    What is the full assebly of conduit parts a connector use in a 100amp serviice
    What is the full assembly of non matalic conduit parts and connectors use in a 100amp service from a main house 200 amp service box to a annx building sub-box with approved underground wire run including,a separate approved underground 240 4 cable for electric (oven/range 240) neither requier conduit, concerned with wall structure go through points question if entrence service wires can be piped up though floor of new structure and allow for inspections by code officer and electrician sign off.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    Jul 11, 2011, 04:06 AM

    WOW!! That is about as confusing as I have read in a while.

    Can you maybe re-write this in sentences and separate it a bit? I get the gist but I really am not willing to guess at or decipher the whole thing.

    Also, there is no "list". You have to figure out what you need for each job.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #3

    Jul 11, 2011, 04:31 AM
    Ask the electrician that will sign off.

    Since someone will accept responsibility, he/she will need to decide what is the proper size and type conduits, wire, etc.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Minimum distance between emt conduit for data and emt conduit for power [ 1 Answers ]

Minimum distance between emt conduit for data and emt conduit for power?

Replacing a 100amp sub panel [ 1 Answers ]

The panel I am replacing was install by a electrician about 20 years ago. It has served my needs until now. The old sub panel has 6 breakers and the new one has 12. The distance from the house to the garage panel is the same as is was (about 28' of wire). I installed the wire from the house the...

100Amp disconnect panel before 100Amp main pannel [ 5 Answers ]

I would like to relocate my main 100Amp panel to the inside wall of my garage. Code saids the main panel must be on an outside wall. What I was thinking of doing Is install a New Main panel on the inside wall of the garage and put a 100Amp disconnect at the old panel location. I am aware of...

100amp and 50amp subpanels [ 4 Answers ]

I am looking into installing 2 sub panels. The reason for this is the location of the current box in a finished room, with a finished ceiling. And the rest of the basement is NOT finished, and I don't want to mess with running a bunch of stuff through a finished ceiling. So I figured I would run...

View more questions Search