 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Cutoff valve problems
My cold water, under sink, cutoff valve knob is in the off position, but faucet works fine. When I turn the knob toward on position the connection leaks a lot so I can't use the cutoff to work on the faucet. Is the valve backwards? What' to do?
|
||||
Check out some similar questions!
I cut off the hot water valve which stop most of the water from running but I still have some water dripping. Is there a cold water valve to cutoff perhaps the rest?
I have replaced the shower cut-off valve twice because when the tub faucet is on, the shower head leaks. When the shower is one, the faucet has some water running. What do I need to do?
I'm trying to turn the water off to the house had the Isolation valve will not turn. It is a wel Basch 3/4" valve. It looks like it has a top cover with a square on that. I have placed a wrench on it but it will not move. I'm I just fighting a turf valve or am I doing something wrong?
Hi, I want to install my washing machine water valve on the side of my washing machine so I can stack the washer and dryer and still have access to the valve. The installation instructions that come with the valve ( standard Watts 1/2" dual ball valve) say that the valve should be 3" above the...
I have a miller/nordyke propane runned furnace m1 series. I have had the gas valve replaced and the ignitor. They checked the control board, there was nothing wrong with that. :p Here is the problem. The furnace runs fine and follows the sequences it should, but when the gas valve engages,...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
