 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Mancesa toilet
I have a mancesa toilet that I installed a few years ago. It was a touchy install to get it just right so it wouldn't run. Now it is running again after the flush and fill cycle happens. The toilet is fine - but the tank continues to let water into the tank after the cycle is complete.
The number on the back side of the tank cover is 0829080357.2 the number # on inside back of the tank appears to read as follows, 003008295 5. The flush is 1.6 gallons. It was designed to look a little old fashion. What's the deal - do I have to replace the inards. Let me know. John Mundt 612-801-5742 [email protected] |
||||
Check out some similar questions!
I recently bought a Mancesa toilet I think the model number is PM300 1.6 gallon flush bought from Menards. It will sometimes flush but most of the time it will not the toilet I took out was working correctly when replaced. Can you give me the manufacturer to contact to see if there are any recalls....
I put the tank on the base and it seems very wobbly looks like the gasket is to thick is this normal
I have a Mancesa 1.6 gpf toilet 5 years old. It has no flush power and the tank handle has a loose feel to it when I flush.
I don't know anything about toilets, I am looking for Mancesa tank model #4860 6 LPF WL. I am not sure it is made by? I only need the tank not the lid. Can you please help me? Thank you! I am in Elgin, IL
New Mancesa San Marino toilet. Water level in bowl slowly lowers to minimum level within 10minutes. Friend of mine bought the same toilet and its happening with his as well. This is not related to improper or plugged vent line. Can't find Mancesa website ti askthem. Thanks for any replys.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
