I have a mancesa toilet that I installed a few years ago. It was a touchy install to get it just right so it wouldn't run. Now it is running again after the flush and fill cycle happens. The toilet is fine - but the tank continues to let water into the tank after the cycle is complete.

The number on the back side of the tank cover is 0829080357.2 the number # on inside back of the tank appears to read as follows, 003008295 5. The flush is 1.6 gallons. It was designed to look a little old fashion.

What's the deal - do I have to replace the inards.


Let me know.

John Mundt
612-801-5742
[email protected]