Ask Experts Questions for FREE Help !
Ask
    mrsdsblessed's Avatar
    mrsdsblessed Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 4, 2011, 02:38 AM
    We got a hunter dig thermostat 44127 what color wire goes in the rc?
    What I am trying to say is that my unit has a switch on the in house unit that we switch to heat for our heating needs then we switch to air for our cooling needs. They are not controlled by the thermostat only when the heat is switched on the thermostat only controls it & not the air but when it is switch on the unit itself for air the thermostat controls the air only. So my question is what is the color of the wire that is for the cooling to run where it will cut the system on & off to go in the RC cause all my wire colors are red yellow blue green white? Cause my system will not shut off if I have it switch to the cool & it does shuts off if I put it on the heat that's on the thermostat then no air at all. Can someone help me clear this up where my air will work coming off & On with the cooling switch on the thermostat?? We don't have the rc hooked up it is also showing a red wire should go there too but I only got 1 red wire & that's in the RH! Please help??
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
     
    #2

    Jul 4, 2011, 10:24 AM
    Most times if your system has only 1 transformer you need to put a jumper from RC to RH which gives you power to both heat and cooling ,whichever you have switch on tstat set for

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Help! Wiring new thermostat... Old Honeywell T834 to Hunter dig/program 44155 [ 4 Answers ]

I have an obselete honeywell t834c2499 thermostat & am installing a new hunter thermostat model 44155. Old thermostat has blue wire=B green=G red=R yellow=Y white=W and a red wire jumper between 1 & 2. New stat has Y1, W/B, Y/O. RH, RC, and G with a jumper between RH & RC, directions say to remove...

I'm replacing an old 2 wire thermostat with a Hunter (#44155C). Wire placement? [ 3 Answers ]

I'm not sure of the wire placement. I have a black and white wire attached to my old thermostat. The new thermostat has attachments labeled G, RC, Rh, Y/O, W/B, Y1. There is a jumper connecting RC and RH. Do I connect the black wire to RH and the white wire to W/B? Any help would be greatly...

Hunter 5 Wire Thermostat [ 19 Answers ]

Please help... I installed a Hunter Thermostat last winter and heat works fine. Now the AC is not coming on. I think it is the way the thermostat was installed. I threw away the manual and can't figure out the wire connectors. Currently, this is how I have it connected. Green wire to G...

Thermostat wiring hunter 4 wire [ 3 Answers ]

I need help wiring a 4 wire system red green blue and white. I am trying to wire a hunter thermostat and have a forced gas furnace/ac unit. I put red to rh with a jumper from rh to rc and green to g and white to w and blue to Y1. It will not work. Please help any info would be appreciated. It...


View more questions Search