Ask Experts Questions for FREE Help !
Ask
    roadmen1's Avatar
    roadmen1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 29, 2011, 05:37 PM
    Clunking in first gear and slipping
    I have a 2000 windstar ans when I start it chadders and slipps,but once I get going in 3rd it fine. Does it sound like something simple.It has 80.000 miles.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Jul 1, 2011, 06:30 AM

    Drain and clean pan, clean magnet, replace filter (if possible), and refill with Mercon V fluid. If this doesn't solve the problem, take it to the dealer.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Car gear not switching to 2nd gear [ 0 Answers ]

My toyota 98 camry can't switch form 1st to 2nd gear, Goes reverse.. Dashboard is off at the same time, no speed no rpm, no temp. please help

Repalace ring gear gear on brigg and sratton 14.5 engine [ 1 Answers ]

How do you removed the ring gear from the fly wheel and put on new one on the teeth is worn out and the starter will not turn the motor

Ford taurus transmission gear slipping [ 2 Answers ]

Recently had 1996 taurus trans. Overhauled. Gear still slips between 2nd and 3rd when warmed up but not cold. Mechanic said he only replaced the burned up clutches but nothing else.

Hyundai Elantra slipping out of gear [ 1 Answers ]

Hello, We have a 2001 Hyundai elentra, manual transmission, 70k miles and are very conservative drivers, i.e. we don't ride the clutch. Lately, during cold mornings only, 5th gear and 3rd gear slip out of place and go into neutral while driving. It's weird and does not happen during the day in...

View more questions Search