 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Payne Model PG8UAA048091 Central Air & Heating Unit
If I turn the unit on for heat or air the blower turns on and that's it. I was getting a flashing LED code 33, then I tapped the limit switch. Now I'm getting a code 12. Stll only the blower turns on.
Any ideas? Thanks |
||||
Check out some similar questions!
Breaker to central a/c was tripped into off position,I later noticed dog chewed up electricl wires to the unit,I rewired it flipped breaker to on position and turned the unit on,it kicked it off again.I tried to flip it, it vibrated and shut itself off again. The last time I attempted to put...
The central heating unit in our mobile home is just blowing semi warm air, not blowing as hot as usual. Some of the air even feels a little cool at times. What could the problem be?
Air was on working fine, noticed it had stopped, went into furnace room and found water on the floor, (coming from under furnace, in motor compartment) obviously and icing condition. Took care of water let it thaw all night now blower motor is running very slow, capacitor is good on motor, motor...
I have al old rudd heating and air unit which I need to wire. How do I find a schematic or find the easiest way to wire it. I can get the inside fan to turn on but with the heater coils running. It won't turn on to just fan.Outside by pushing down on the 3 what trip I can activate the fan and...
My central heating unit comes on but blows cold air. Thought it could be the thermostat but the air conditioner comes on just fine? Any idea what could be wrong with it?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
