Ask Experts Questions for FREE Help !
Ask
    buddy07's Avatar
    buddy07 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 14, 2011, 05:37 AM
    Hello, I have a Rheem ac unit I just had to replace the fan motor.
    The red wire connecting the condencer to the compaciter burned away from compacitor after workinf good for two days so I twisted it back around it and it worked fine for two or three hours and went back off. I check again and the same wire had melted into another wire. Is this thing possibly wired wrong, do I need to replace the wire with a new one, I'm new to this does anyone know what the problem is?
    jose40's Avatar
    jose40 Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Jun 14, 2011, 06:10 PM
    I just had my unit recharged but its still not cooling??
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hello, I have a Rheem ac unit I just had to replace the fan motor. [ 1 Answers ]

Hello, I have a Rheem ac unit I just had to replace the fan motor. It appeared to work fine for about two days and cooled good. On the third night I noticed it wasn't cooling when I checked the next day I found that the red wire connecting the condencer to compaciter was burned and broke away. So I...

Split unit RHEEM ac compressor fan motor makes loud noise & cuts off then on, [ 2 Answers ]

New1/3hp 1075 208vac ao smith

Rheem RACB-030JAS residential A/C unit condenser fan motor replaced [ 26 Answers ]

I just replaced the condenser fan motor and it initially spun up then stopped, after 10 minutes it ran again then stopped. Now I can hear it buzz then stop but not spin. The original motor was a GE 5KCP39BG K075CS 1/6 HP 1075 RPM 208/230 V its replacement a Dayton 4M205G 1/4 hp 1075 RPM ...

Hard to replace Rheem Criterion Inducer Motor? [ 1 Answers ]

I found the part #66847 Inducer motor ($200) for my 1992 Rheem Criterion RGDG... The ball bearings were going bad and HVAC companies want from $500 to $890 to replace it. Is it hard or anything tricky about replacing it yourself? I can order the part and try it myself or order the part and have...

Replace Rheem Criterion inducer motor [ 2 Answers ]

Can someone tell me what part number and where I can get a replacement inducer motor on a Rheem Criterion, circa 1992, model RGDG-150ARJR? Already had someone come out and said ball bearings were going bad and motor should be replaced. They wanted to charge me $400 for the motor alone. I see...

View more questions Search