Gti15t weedeater drive shaft removal?

rsjoiner Posts: 1, Reputation: 1

New Member

Jun 10, 2011, 05:43 AM

Gti15t weedeater drive shaft removal?

The drive shaft on my gti15t weedeater broke. I removed the shaft housing from the motor and the top part of the broken cable came out but I can't get the bottom piece out.

Check out some similar questions!

L110 drive belt removal need diagram for removal [ 0 Answers ]

I have a john deere L110 42 inch deck. I am trying to replace the drive belt I cannot get the steering shaft out so I can get the belt off I have everything loose but that shaft with the sprocket on the end. If I had a diagram to see I might be able to take it off.

How to take off the shaft that the spool is bolted to on a homelite weedeater [ 1 Answers ]

I bought a different cutting attachment for the weedeater and it requires that I take off that shaft that sticks out at the end where the spool is bolted into. It has one bolt at the top of it but no way for me to stop the shaft from spinning.

JD 160 tranny input shaft needle bearing removal [ 1 Answers ]

Can someone help? I have a JD 160 that the needle bearings went on the input shaft to the tranny... The old bearing races are all that's left, how do I get them out to replace them?:confused: I believe they are pressed in? Do I need a press of some kind to get them out? Thanks in advance

Weedeater featherlit+ w/ loose shaft [ 3 Answers ]

I recently replaced the cable between the trigger and the carb. On this 17" trimmer. Unit reassembled OK, engine runs great. Problem is now at the other end. The drive cable shaft housing between the trigger and the line head now swivels independently of the trigger/engine assembly. I've...

View more questions Search

Check out some similar questions!

Add your answer here.