Ask Experts Questions for FREE Help !
Ask
    cb160's Avatar
    cb160 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jun 11, 2008, 07:34 PM
    JD 160 tranny input shaft needle bearing removal
    Can someone help? I have a JD 160 that the needle bearings went on the input shaft to the tranny... The old bearing races are all that's left, how do I get them out to replace them?:confused: I believe they are pressed in? Do I need a press of some kind to get them out?

    Thanks in advance
    cb160's Avatar
    cb160 Posts: 3, Reputation: 1
    New Member
    		  
    #2

    Jun 12, 2008, 07:12 PM
    After talking with a co-worker, I decided to try the socket with an extension attached, and it worked like a charm! :D FOr what is worth, I hammered them both out through the top, bad news for me though, the printout I used from the jdparts.com website, was for the wrong tranny, now I got to go get the right bearings... oh well could be worse.

    Thanks anyway!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Tranny leak [ 8 Answers ]

Anybody ever done any work on a GM th350 its leaking and am not sure what part is called believe it's a servo cover its on the passenger side about midway up the tranny just above the oil pan for the tranny. Is there a seal under this cover that's easily replaced. I do most of my own mechanic work...

Removal of Load Bearing basement wall [ 2 Answers ]

Looking to remove a wall that spans 21' in the basement and need to know what type of leader(metal or wood & size) is best and can I do this with on one post at each end? Glenn

Explorer tranny [ 1 Answers ]

I have a 2000 for explorer eddie bauer. Approx 133,000 miles. When the transmission shift from second to third, it either slips or doesn't catch right away, the rpms will jump and then it will catch. I called a transmission shop and they told me they will have to replace the whole transmission. I...

Tranny problems [ 5 Answers ]

95 civic has intermitten problems. Tranny goes out after a few miles. Let it sit until it cools down able to drive again? Could it be the ecm?

View more questions Search