Ask Experts Questions for FREE Help !
Ask
    tami1959's Avatar
    tami1959 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 3, 2011, 07:54 PM
    Fan Relay Switch
    Wiring diagram for fan relay switch for intertherm unit. My part is by Packard Part #PR380

Check out some similar questions!

Replacing fan motor relay switch with upgraded switch [ 4 Answers ]

Hello, I've searched online to locate a replacement fan motor relay switch for an old Fedders propane heating unit in my greenhouse. The replacement should be fairly easy to do, however the part I was needing ( RBM 84-20103-301A) was listed as obsolete and was replaced by (McQuay part #...

My furnace's fan is NOT blowing. Is there a relay to control the fan and where it is? [ 1 Answers ]

"After vaccum my furnace(Heat only, Day and Night furnace with model #396GAW00100-ACAA), the fan stop blow but burner will be on when I adjust the temperature below the setpoint on thermostat. My fan had problem last year. It will not stop even after burner off for long time. I had to tap side of...

Separate Fan light switch, fan switch and switch for can lights to one location [ 2 Answers ]

I have A circuit that has 6 can lights and a fan light. The power is at the switch box I need to know how to wire the separate switches for the cans,and the light on the fan, and fan (That would be in a three gang switch box.) to one location.

House heater fan relay switch [ 1 Answers ]

House central unit, the fan continuously runs

How to fix fan relay switch [ 4 Answers ]

How do I fix a fan relay switch

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.