Ask Experts Questions for FREE Help !
Ask
    burrdonald's Avatar
    burrdonald Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 30, 2011, 06:21 AM
    How do I pull a drive belt pully off the crankshaft for a garden tractor?
    How do I pull a drive belt pully off the crankshaft for a white garden tractor gt2550. I NEED TO GET TO THE PISTONS TO CHECK the rings, and I don't want to put a pully on it for fear off messing up the pully.
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #2

    May 31, 2011, 09:03 PM

    They very seldom come off with out messing up.
    .you might try spraying some pb blaster on it and let sit.
    If you had a torch you could heat it up and maybe get it off.
    I usually plan on replacing it when I take one apart.
    Luck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

1996 taurus crankshaft pully [ 4 Answers ]

I have tried for 2 days to remove the crankshaft pully from my 96 ford taurus,24 valve v6. It won't come loose can anyone help

Belt replace; PoulanPro/WeedEater garden tractor [ 2 Answers ]

Bought second-hand, the belt snapped connecting engine pulley to left blade. Can't see a good route for replacement. Nor can I find a model number anywhere on the machine.

Crankshaft Pully Bolt [ 5 Answers ]

Trying to loosen the crankshaft pulley bolt on a 87 Honda accord. Can't find away to hold the pulley and turn the bolt. Any help would be appreciated.

Belt size for craftsman garden tractor [ 1 Answers ]

I have an old 44 inch cut 18hp craftsman garden tractor and I need to replace the belt and do not know what size I need The one that was on there was not the correct size Thank You

Smell of burning rubber after changing drive belt on Sears Garden Tractor [ 3 Answers ]

I changed the Motion Drive Belt on my 20hp 1999 Sears Garden Tractor. After changing, tested it, and it has plenty of "pick up" and runs good. However, after a minute or two, smell burning rubber. Is this normal, perhaps a "break in" period, or is it likely I have done something wrong?

View more questions Search