Ask Experts Questions for FREE Help !
Ask
    robertn_1's Avatar
    robertn_1 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Feb 28, 2009, 11:31 AM
    Belt replace; PoulanPro/WeedEater garden tractor
    Bought second-hand, the belt snapped connecting engine pulley to left blade. Can't see a good route for replacement. Nor can I find a model number anywhere on the machine.
    mower_man's Avatar
    mower_man Posts: 81, Reputation: 2
    Junior Member
    		  
    #2

    Feb 28, 2009, 04:57 PM

    Post model/serial #.

    Is it a manual shift,or hydro?

    Garden tractor or laen tractor?

    All luck to you,you will need it.

    P.S-look under seat on a tag located under the seat.

    Mower_Man
    _________________
    "Good Luck."
    robertn_1's Avatar
    robertn_1 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Mar 12, 2009, 01:20 PM
    1,000 thanks to mower man. Mission accomplished.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Belt size for craftsman garden tractor [ 1 Answers ]

I have an old 44 inch cut 18hp craftsman garden tractor and I need to replace the belt and do not know what size I need The one that was on there was not the correct size Thank You

Blade belt on weedeater tractor [ 1 Answers ]

How do you change the belt that powers the blades? It seems that the deck has to be removed but I'm not sure.:confused:

Smell of burning rubber after changing drive belt on Sears Garden Tractor [ 3 Answers ]

I changed the Motion Drive Belt on my 20hp 1999 Sears Garden Tractor. After changing, tested it, and it has plenty of "pick up" and runs good. However, after a minute or two, smell burning rubber. Is this normal, perhaps a "break in" period, or is it likely I have done something wrong?

View more questions Search