| 
 
 
  Not your question?
  Ask your question
  View similar questions
   
 Add your answer here.Check out some similar questions!
Light fixture shorted out, replaced fixture, now no power
 [ 4 Answers ]
 In my bathroom, I have 1 grounded receptacle, & (1) 2 wire light switch that controls the 4 bulb light fixture. This is on a circuit with my upstairs lights & outlets, which all work with no problem. The bathroom receptacle has never worked, I replaced it after moving in house 10 years ago, & it... 
How to change a pull chain fixture to a fluorescent light fixture with a switch ?
 [ 1 Answers ]
 I would like to install a switch for a pull light fixture. The only power is from the light fixture, but I want to put a light switch on the wall as I enter the room, Can you help ? 
Light Flicker
 [ 11 Answers ]
 I had a plug in the garage that was not working. I found the problem to be in the control panel and got the plug working by jiggling and finally pressing on the circuit breaker. Since then, I have noticed the other lights in the house will flicker. We used to get a little flicker on and off... 
Light Flicker
 [ 1 Answers ]
 I have a relatively new 100 amp service panel with breakers installed by an electrician in my 1950s Bungalow. I replaced most of the wiring throughout the house - most of which was ungrounded. I also replaced most of the switches and outlets. I installed some new recessed lighting. I get a... 
Light flicker problem
 [ 6 Answers ]
 I have a new Hampton Bay flurorescent light (193871) that flicker (strobes) after it is turned off. It will strobe all night. I returned it one time, the new one does the same thing. What should I do :confused: ? Tedndd View more questions Search 
 |