 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Inside blower on central unit does not come on when placed on auto mode
I have a Rudd, 2 ton central a/c unit, all electric home no furnace, therefore the blower unit, duct work is in the attic which is a crawl space.
I used the a/c last week, worked fine. Today, I turned it on, the outside unit came on, but inside fan did not. I moved switch from auto to on, and it came on, but I have to manually shut it off, when the unit shuts off. Will it hurt to run unit w/o running inside blower? If I leave blower on all the time, when a/c shuts off the blower fan brings in all the hot air from attic, and a/c runs too much. |
||||
Check out some similar questions!
I just installed a NOMA 7-day programmable thermostat for an electric furnace/AC system (ceiling unit). I believe the wiring (5-wire) is correct. When I set it to COOL with Fan set to AUTO, it turns on the A/C and the fan automatically. Good. But when I set it to HEAT with Fan set to AUTO,...
I have checked the tstat and the wiring could it be the relay in the board?
I have a central heat and air unit. Why does my outside air conditioning unit stay on after my inside blower shuts off? It does not stay on every time the blower shuts off, but it does stay on a lot. It has been doing this for several years now.
Carrier 48SB-030080301 1990 model nat gas. On a/c mode works fine. Heat- burner lites but blower will not come on at all unless on manual. I changed the J2 jumper on thermostat from hg to he to see if I could get by for a while and its been working for about a month now. Other than blast of cool...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
