Ask Experts Questions for FREE Help !
Ask
    oneqiksti's Avatar
    oneqiksti Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 16, 2011, 09:29 PM
    How to remover plunger that got separated from trip lever assembly
    My plunger got separated from the trip lever assembly. How do I get the plunger out?
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #2

    May 16, 2011, 11:40 PM

    Remove the face plate item 3 in the picture , get a coat hanger wire make a hook and try it with see if that will work, if not you will need to disassemble the bath tub waste and remove it, see the image below, Thanks.

    John
    Attached Images
     
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Broken Trip Lever Assembly [ 3 Answers ]

I was in the shower today, and noticed the water not draining. I pushed the lever down to stop the water, then put it up to open it all the way. This has fixed it in the past. Today, the plug did not go back up. I was able to use a screwdriver and pull the plug up. Now, when I did that, I pulled...

Tub drain plunger separated from trip lever assembly [ 1 Answers ]

I had a plumber fix a tub drain plunger. Apparently, instead of fixing or adjusting the old type (lever to visible stopper), he must have replaced it with a newer type (lever to internal stopper). Problem is that the lever is now disconnected from the internal stopper. The eye hook at the bottom of...

Trip lever on tub [ 4 Answers ]

The trip lever on my lasco spa tub drain will not move. I have removed the plate and the plastic rod inside will not pull out.

Replacing trip lever in bathtub [ 1 Answers ]

How can I replace the trip lever in my tub? The handle broke off... inside parts are still good... I just need to connect the new plate to the lever in the inside of the pipe.? Jose

Bathtub Trip Lever [ 5 Answers ]

My wife and I purchased our first house two years ago. We are finishing up a bathroom remoldel that we've done 100% ourselves thus far. I refinished the bathtub with 2 part epoxy and it looks great! So great that I would like to replace the 50+ year old trip lever/plate assembly. To my...

View more questions Search