Ask Experts Questions for FREE Help !
Ask
    lplahy's Avatar
    lplahy Posts: 1, Reputation: 1
    New Member
     
    #1

    May 6, 2011, 07:12 AM
    Repair pull string on craftsman ez3 mower
    Pull string is jammed
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
     
    #2

    May 6, 2011, 07:56 AM

    You may want to elaborate on what you mean by "jammed".

    Jammed as in it won't go back in? Jammed as it won't come out? Jammed as it the engine won't turn even a tiny bit?

    What are your level of mechanical abilities? It can be a rather difficult repair if you lack the aptitude and abilities to disassemble and reassemble the recoil mechanism (trust me its frustrating to do)... but replacing the assembly is far easier if much more expensive.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #3

    May 6, 2011, 05:09 PM

    If you giive us the Sears model number and also post this in tools and equipment you will get more answers. Is this your mower http://www.hammerwall.com/Manuals/Cr...ower/L0810022/

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman weed eater model 358.791050 need to install new pull string [ 1 Answers ]

Craftsman weed eater model 358.791050 need to install pull string

Belt adjustment on a craftsman EZ3 [ 1 Answers ]

The drive belt for the mowing deck is slipping and breaking belts. Is there a way to tension the belt so that it is tight?

Craftsman mower 917377292 pull rope [ 1 Answers ]

The pull rope snapped right at the engine. I can not for the life of me figure out how to get into the assembly to rewind it. Any suggestions or advise?

Pull string mower [ 1 Answers ]

My mower pull string want pull out only about 3"4" inch and therefore I can't start my mower due to the fact


View more questions Search