 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Panasonic TV ct36hx42, changed fuse, not starting up
I have a panasonic CT-36HX42 TAU, and it's not starting up. I found your thread, regarding the same issue, took thread's advice, and changed to a new fuse radio shack slow blow 6.3amp/250v, everyone has had great success with changing the fuse, it leaves me wondering if I did not put it the fuse correctly? TV, red light, screech and nothing, any suggestions what I could do, would like to fix this TV if I can, anything is greatly appreciated
|
||||
Check out some similar questions!
Carrier indoor air handler keeps immediately blowing 5 amp fuse. Changed contactor on the outside unit and turned on the breaker and air handler fan came on. Went to thermostat selected a/c and compressor came on turned it to off and compessor stopped but air handler fan won't. Made sure fan was...
The fuse box is an old school with the 15 amp and 20 amp screw in fuses. Everything else in the house works and I have changed it out a ouple of times with a fuse that does work what would be my next step?
Recently I got a Contractor to change my Fuse Panel to circuit breaker. How do I know he did it right?
I replace an old ceiling light. When I took out the old one the wire casing was miscolored and brittle and fell apart. The incoming wire is white, black and ground. Then there is an outgoing white, black and ground. I tied in the wires to the light by matching the colors together. The light...
I blew a 60amp cartridge fuse I replaced it but now I lost a 15 amp circuit all fuses look OK don't know what happened... thanks
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
