Ask Experts Questions for FREE Help !
Ask
    littlejeannie77's Avatar
    littlejeannie77 Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 25, 2011, 07:34 PM
    Lights won't come on...
    When I pull the chain to turn the lights on my ceiling fan it doesn't do anything. No clicking sound, nothing. This means no lights either. Is there a part I need to buy and replace to fix this problem or is this fan a goner?

    Jean
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
     
    #2

    Apr 26, 2011, 04:17 PM

    Jeanie,

    I'm not clear as to what you are saying.

    Is the fan controlled by a pull switch and the lights controlled by a wall switch? Or are both functions controlled by pull switches on the fan unit?

    Has the fan and lights been working previously or is this a new install?

    Have you verified that the circuit breaker that is protecting the supply for this fixture is working properly?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #3

    Apr 26, 2011, 05:31 PM

    Just so we are clear, you only have pull chains for both fan and light, no remote or wall switches at all, right?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

No tail lights no brake lights or dash lights on a 1994 mazda b3000 [ 6 Answers ]

I own a 1994 mazda b3000 and was driving along when the dash lights went out then when I got pulled over come to find out the tail lights and brake lights don't work as well I noticed thogh the abs light flash's 12 times then pauses for a second then flash's again 12 times and so on all the fuses...

Tail lights/ Dash lights/ gear lights out in 96' infiniti G20 [ 0 Answers ]

I checked and both the fuses and blubs are fine, brake light and head lights work

Tail lights or signal lights not working but break lights are [ 6 Answers ]

Can someon help I have no dash signals or tail lights but I have brake lights an head lights

Tail lights and dashboard lights not workingbut brake lights work [ 4 Answers ]

I have a 95 ponitac bonneville, when I pull the switch to turn it on, the headlights only go on. My dash and tail lights will not go on. When I press the brake my dashboard lights go on. When I release the brake the ddash goes back off. Help anyone


View more questions Search