Braeburn to Honeywell thermostat issues

Mimiarch Posts: 1, Reputation: 1

New Member

Apr 15, 2011, 09:30 PM

Braeburn to Honeywell thermostat issues

We are trying to replace a Braeburn non-programmable thermostat with a Honeywell programmable thermostat. We have not been able to get the furnace to turn on. What could be the problem?

Check out some similar questions!

Changing Braeburn 2200 thermostat to Honeywell RTH3100C non-programmable? [ 0 Answers ]

I wanted to replace a Braeburn 2200 programmable thermostat with a simpler non-programmable one. I purchased a Honeywell RTH3100C and carefully labelled my wiring, then installed it following the very simple directions. When I put the breaker back on I had fan, A/C, but no heat. The heat pump would...

Braeburn 5000 Thermostat [ 1 Answers ]

When I turn the thermostat to heat, at first it would come on for a few seconds and quickly shut off but no it doesn't come on at all. When I put it on cool, it works fine. Please help me with this issue.

Wiring Issues -Replacing Rheem Thermostat with Honeywell [ 1 Answers ]

I'm replacing a Rheem thermostat with a Honeywell 6300 for an electric heating/ac unit and I'm having trouble matching up the wire colors. The Rheem thermostat is one of the old ones with the mercury, so the wires aren't labeled only color coded. The Rheem thermostat has a yellow, blue, red,...

Honeywell stat to braeburn [ 1 Answers ]

I have a honeywell stat t8734c1432. I replaced it with a braeburn 5000. I have a staights cool outside condenser and a gas furnace in the attic. I have no heat after changing the stats. The honeywell is a 4 wire stat with a jumper between the y terminal and terminal 1. white is to w, red to r,...

View more questions Search

Check out some similar questions!

Add your answer here.