Ask Experts Questions for FREE Help !
Ask
    Shermlocc's Avatar
    Shermlocc Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 5, 2011, 08:34 PM
    What would cause a fan on an electric furnace to continuously cycle on and off?
    I am toubleshooting an electric furnace. When calling for heat, the fan cycles on and off. I have replaced fan relay, motor, and limits. What am I overlooking?

Check out some similar questions!

Furnace runs through cycle but at end the fan will not shut off [ 0 Answers ]

Furnace runs through cycle but at the end blower does not shut off and continues to blow cold air until I manually go to the furnace and unplug the plug at the outlet.

Blower runs continuously after heating cycle [ 1 Answers ]

Hi, I have a 1980's 100,000 BTU Heil Gas Furnace (Spark Ignitor type). The problem that I am having is that the Blower fan runs continuously after the heating cycle. I know that it should run for awhile after the heating cycle to cool the Burner etc to prevent warping, but the Blower just keeps...

Carrier furnace purge exhaust fan continues to cycle and cycle [ 3 Answers ]

Carrier furnace/AC Product model #58ZAV 075-101JC Model #58ZAV 075-JC Series 100 Serial #2093A16 303 Natural Gas/Propane, heat furnace runs on Propane. Problem: With the unit turned to cooling with the thermostat, the heat pre-purge exhaust fan continues to cycle on and off, sometimes...

Using the furnace blower fan continuously [ 3 Answers ]

Please let me know if it is more efficient to have the blower fan on continuously rather than in the automatic position. If so, does it make a difference in heating mode or AC mode?

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.