Why won't burner light?

mwboyd2008 Posts: 2, Reputation: 1

New Member

Apr 2, 2011, 04:01 PM

Why won't burner light?

Pilot light is on and has been replaced along with thermopile. Thermostat calls for heat but burner will not ignite. Tried putting wires together to make it light but that didn't work either.

Check out some similar questions!

Furnace Burner Won't Light! [ 3 Answers ]

I have a Lennox Whisperheat gas furnace model no. G20Q3/4E-125-2. On normal start up the pilot would light and then there would be a click click click noise several times then the burner would light and the blower would kick on. Now what is happening is the pilot lights and then the clicking...

Burner doesn't light [ 0 Answers ]

Pilot will light but burner doesn't. What part is the most likely culprit? Unit is a late 70's Day & Night Model 394GAW000075

7956a856 burner won't light [ 5 Answers ]

Has good pilot but I turn thermostat up and pilot goes out. You have to wait to relight when I open door to light it about burned my hand.This furnace has set for 2yrs and with no action.Does the burner assem need cleaned?please help Thanks Jerry This is in a mobile home

Armstrong Ultra sx 80, pilot light lit, but burner does not light [ 4 Answers ]

Armstrong Ultra sx 80, pilot light lit, but heater doesn't turn on

Main Burner won't light [ 6 Answers ]

Hello, I have a Rheem forced air furnace, gas, (mod# RDG-10EQGR) and main burner won’t light The prepurge vent motor starts and after 34seconds the hot surface ignitor glows red, 34 seconds later I hear the relay click in the ignition module for the burner valve, but valve doesn’t open and no...

View more questions Search

Check out some similar questions!

Add your answer here.