Ask Experts Questions for FREE Help !
Ask
    Danders's Avatar
    Danders Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 12, 2010, 09:52 AM
    Burner doesn't light
    Pilot will light but burner doesn't. What part is the most likely culprit? Unit is a late 70's Day & Night Model 394GAW000075

Check out some similar questions!

Furnace Burner Won't Light! [ 3 Answers ]

I have a Lennox Whisperheat gas furnace model no. G20Q3/4E-125-2. On normal start up the pilot would light and then there would be a click click click noise several times then the burner would light and the blower would kick on. Now what is happening is the pilot lights and then the clicking...

Armstrong Ultra sx 80, pilot light lit, but burner does not light [ 4 Answers ]

Armstrong Ultra sx 80, pilot light lit, but heater doesn't turn on

Furnace burner will not light [ 3 Answers ]

I have an old Bryant that has very few safety switches it has a continious burn pilot. My problem is the burner will not light. I have cleaned burners, replaced thermostat. I can get the fan to run with the "Fan on" selection of the thermostat. I check the voltage at the gas vavle, from the limit...

Burner won't light [ 4 Answers ]

When I turn on the furnace the burner doesn't turn on what should I do?

Main Burner won't light [ 6 Answers ]

Hello, I have a Rheem forced air furnace, gas, (mod# RDG-10EQGR) and main burner won’t light The prepurge vent motor starts and after 34seconds the hot surface ignitor glows red, 34 seconds later I hear the relay click in the ignition module for the burner valve, but valve doesn’t open and no...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.