Burner does not stay lit..

tommcmullen Posts: 1, Reputation: 1

New Member

Apr 2, 2011, 03:41 PM

Burner does not stay lit..

Flames go out after a few minutes, then restarts right away... the more it runs the shorter the cycle... starts normally, fan comes on normally...

Check out some similar questions!

Pilot light will not stay lit in gas water heater after burner has been on? [ 6 Answers ]

I can light the pilot, but after the burner has been on and it goes off it is almost like it blows out the pilot.

Pilot light will only stay lit long enough for my burner to fully heat my water. [ 5 Answers ]

I can light the pilot light and the burner will turn on. Once the water is fully heated, the burner turns off, the pilot light goes out and I am unable to keep the pilot light lit until the unit cools back down (after the pilot light goes out, I have to wait a couple of hours and use some of the...

Duomactic olsen ultramatic burner won't stay lit [ 0 Answers ]

I have a duomatic olsen ultramaxII the burner lights but goes right Out

Nordyne m1mb furnace burner ignites, will not stay lit cylces 4 times then lockout [ 1 Answers ]

My nordyne m1mb furnace burner ignites, howerver will not stay lit - it cycles through about 4 times, then locks itself out - the pressure switch appears to be okay and the thermocouple was replace two months ago

Furnace burner won't stay lit [ 2 Answers ]

I have an older model Night & Day model c100u series 510 gas furnace. The burner won't stay lit when the thermostat kicks on. I replaced the thermocouple but the burner still lights then immediately goes out. Any help?

View more questions Search

Check out some similar questions!

Add your answer here.