Duomactic olsen ultramatic burner won't stay lit

Check out some similar questions!

Coleman 7900 series pilot won't stay lit took burner assembly out and cleaned it sti [ 2 Answers ]

Have a coleman presidential 3 furnace it's propane pilot won't stay lit took burner assembly out cleaned it doesn't seem to be clogged

Nordyne m1mb furnace burner ignites, will not stay lit cylces 4 times then lockout [ 1 Answers ]

My nordyne m1mb furnace burner ignites, howerver will not stay lit - it cycles through about 4 times, then locks itself out - the pressure switch appears to be okay and the thermocouple was replace two months ago

Pilot light is lit but burner is not working [ 1 Answers ]

I have a Carrier outside combination unit. When I turn on the gas and turn the pilot switch to pilot I can hear a constant flow of gas going through the copper tube to the pilot. And the pilot lights with ease. I can even have the switch to on and the pilot lights immediately. Now when I turn on...

Furnace burner won't stay lit [ 2 Answers ]

I have an older model Night & Day model c100u series 510 gas furnace. The burner won't stay lit when the thermostat kicks on. I replaced the thermocouple but the burner still lights then immediately goes out. Any help?

Flame will not stay lit [ 1 Answers ]

My HVAC is 'Day and Night Forced Air" and my problem is the flame after it is ignited by the auto pilot will not stay, the auto system goes to its cycle of purgingand lightoff but the flame will not stay lit. I already ensure that the furnace doors are placed properly and I believe my thermostat...

View more questions Search

Check out some similar questions!

Add your answer here.