Ask Experts Questions for FREE Help !
Ask
    wdr31's Avatar
    wdr31 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 28, 2011, 05:24 PM
    3 light vanity set,2 of them
    Wired into a toggle switch, left side is on, right side went out. Everyhing appears hooked up, what do I check
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Mar 28, 2011, 08:18 PM
    Should be a black and white wire from each socket, then maybe down to just 1 black and white to connect to.
    Likely where the lights all connect, you will likely have to remove the fixture.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bathroom Vanity Light [ 12 Answers ]

I am trying to install a vanity light. There are 4 green wires tied in a bundle, 4 black wires tied in a bundle, one loose green wire and one loose bare wire. The new light has one white wire, one black wire and one bare wire. I connected the wires and all I get is direct current to the fixture....

Replace Vanity Light with Convenience Outlet with Light Only [ 2 Answers ]

I am replacing an older style vanity light in a guest bathroom. The old light has a convenience outlet built into the light fixture base. The new light has only a black, white and ground wire. The painters removed the old light so I do not know how it was connected. The wires coming from the...

Can not hook up new Vanity Light [ 6 Answers ]

Hello, I have a major problem. The vanity light in my bathroom a few days ago just fell off the wall. It was cheap wood and the guy who we bought the house from put it in. Some things are strange in the house like the hallway plugin only will work with nightlights and such, vacuum will not...

Vanity Light [ 1 Answers ]

Recently I changed the vanity light in the bathroom. When I turned on the light I realized the breaker had tripped. I reset the breaker and all was fine for a couple days... the breaker tripped again. So I reset it and the same thing... 2 days later it tripped. I removed the light and can find...

View more questions Search