Ask Experts Questions for FREE Help !
Ask
    Lynneb's Avatar
    Lynneb Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 27, 2011, 11:25 AM
    I have a rectangular ironing board with a flip side and corner
    That my Mom gave me in the 1960's. She got it from Montgomery Wards. I need a new cover for it. Any suggestions where I might find one is appreciated.

Check out some similar questions!

Does it matter which way round I hang plaster board (Dark side out)? [ 1 Answers ]

Hi - I've built a dry-lined wall & ceiling in a room conversion - now the plasterer tells me the plasterboard is hung the wrong way around (Dark paper side out) & that the plaster will not stick & they need to be reversed - This will mean quite a lot of re-work & cost. - Is he correct ?

Cutting an arc (rounded corner) on plaster board [ 1 Answers ]

Hi, How can I cut an arc or a rounded angle on a plaster board ? Is there a special tool for the job ?

Installing Hardi Board as Side [ 2 Answers ]

I am having hardi board installed on the outside of a garage that was converted to a bedroom. The individual doing the work stated that there is about 6 inches to over a foot of concrete foundation that goes around the room that was laid as the subfloor, so when installing the hardi board siding...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.