 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Blower will not stop on carrier furnace?
O.K. so I replaced the thermostat and the limit switch but blower is still running when the thermostat is in any and all positions . The relays "look" good. How can I tell which relay is bad, if tapping on them doesn't work?
|
||||
Check out some similar questions!
Board says it is a limit switch fault Furace goes into pre ignition, fan comes on and sometimes even the main burner ignites, but the blower will not come on... is this the blower motor or could this be a switch somewhere?
"I also have a Carrier furnace model 58GS050-3 but no central air, motor will not shut off. If I set the thermostat to 'system off' the fan keeps going. Everything works fine including the burner (flame) that goes 'off and on' when elected at the thermostat. I have to remove the lower door to...
I replaced both limits and the control board.This unit does not have an IDM.Could the heatexchanger be corroded and not allowing the proper amount of heat to escape keeping the blower on in default?
I have a 13 yr old Carrier Weather Maker 8000 gas furnace. It heats fine. However, earlier this week, after reaching the set temperature, rather than shutting off the blower kept running, eventually blowing cool air. What's crazier, even after switching the thermostat (a programmable type) to Off...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
