 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have a furnace, which worked well until today. The furnace fan/blower can be turn on manually (switching to ON position from the thermostat--Maple Chase 9600). However, when the fan switch is switched to AUTO position, and the room temperature is below the setting temperature, the furnace is...
Woke up to a cold house this morning. Checked the heater and it was hot, apparently it had just shut itself off. Changed the fan from auto to on and it came on, heated up the house and then I switched it back to auto. It just won't come on in auto mode. Any suggestions for this 18 yr old Lennox...
Sometimes when I have the furnace set on automatic it will not turn on when the temperature goes below the set point. All I have to do in order for it to work again is turn the furnace off then back on (I do this at the thermostat) and it will work fine for a day or two, then the same thing happens...
We changed our old honeywell thermostat (with mercury) to an updated honeywell thermostat (with no mercury) CT87K. After we changed the thermostat the furnace will not automatically kick on and it actually shut off so we had to hit the reset button. The furnace at times now will turn of if we put...
I have a Thermo Pride OH5-85. There are two manual switches installed next to the unit. One turns on the heater one the fan. I'm unable to find out how to have the heater and fan respond to my thermostat. :confused: Currently if the manual fan switch is on and the manual heater switch is on...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
