 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Heater fan will not turn on automatically, but does when switched to on
Woke up to a cold house this morning. Checked the heater and it was hot, apparently it had just shut itself off. Changed the fan from auto to on and it came on, heated up the house and then I switched it back to auto. It just won't come on in auto mode. Any suggestions for this 18 yr old Lennox heater?
|
||||
Check out some similar questions!
Hi. I have a big problem that is killing me. I have a central Heat and AC unit that works well, but the fan won't seem to turn off. The AC and Heat works well, but the fan just keeps on running. I was gone for 3 months for ARMY business and my wife did not know that this was not working right,...
I have a furnace, which worked well until today. The furnace fan/blower can be turn on manually (switching to ON position from the thermostat--Maple Chase 9600). However, when the fan switch is switched to AUTO position, and the room temperature is below the setting temperature, the furnace is...
Ok so I have a day&night A/C and heater setup on my roof. I recently had a problem where the burners would not light so I got a honeywell retrofit kit. Just put that in today and got it all set up. Wasn't very hard to get going. Now the problem is, when I turn on my heater it kicks on, pilot lights...
Model# 3500A816 Coleman central electric furnace for mobile home. AC works fine, but heater cuts on and the fan won't cut off unless I manually turn it off at the thermostat. I've checked all wiring and everything seems to be in good shape. Any suggestions??
I have a Thermo Pride OH5-85. There are two manual switches installed next to the unit. One turns on the heater one the fan. I'm unable to find out how to have the heater and fan respond to my thermostat. :confused: Currently if the manual fan switch is on and the manual heater switch is on...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
