 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I turn my central air conditioner on and I get nothing. Everything is dead. I finally realize that the 3 amp fuse was blown. I replaced the fuse and turn on the air and the fuse gets blown again. I replaced the fuse and this time I turn the heat on. Everything works great. Fuse did not get blown...
The fan outside was working, then made a sound and was no longer spinning. Turned the air on this morning and fan still wasn't turning, pushed it with a stick and fan started turning again. Is this a dirty issue and just needs to be cleaned or something more?
I have a Bryant heater/air conditioner combo that the heater has stopped working. Here is what happens when I turn it on manually- Smaller fan kicks on I can hear the gas come on for a few short seconds I can hear the igniter trying to ignite It seems like it is not igniting and after a...
Our AC works for a while then stops cooling. If we set it for 78 degrees, it will cool to 78 then stop. When it comes on again it will send out lukewarm air that is very humid. To get it to start cooling again we need to turn the thermostat down really low, like to 60, then it becomes too cold in...
Hi I have a central air and heater unit and when I turn it on for heat or air at the thermostat nothing happens. Can you help me?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
