 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
15 year old York Diamond 80 furnace: no power to blower
Igniter works, gas comes on, no power being sent to blower motor when when it's time for the blower motor to come on. I can hear the solanoid click, but when I test across the leads going to the motor, no power present. Any advice would be greatly appreciated.
|
||||
Check out some similar questions!
Hi, I have a 1996 York Diamond 80 furnace. Everything starts up OK (thermostat fine, flue fan kicks on fine, then pilot orange glow, then click, then gas burners fire up, then main blower fan starts). This all happens in about a minute or so, but then the main fan only runs for 22 seconds, then it...
York diamond 90. Blower won't shut off. Switch to cool and reprogramed thermostat. Outside unit runs and cools OK but only way to stop blower is to turn off power to furnace.
Furnace diagnostic light indicates rollout open. Service tech came out and found that rollouts were not tripped. He seems baffled by the problem. The problem is inconsistent. The thermostat calls for heat. The furnace kicks the blower on without igniting burners. Cold air blows through vents. I...
the blower turns on and blows cont. but the burners don't kick on the blinking red light on the box blinks 4 times = high linit switch on
Our basement unit York Diamond 80 runs and run with the ignitor working and the blower running but does not heat up the first floor. The unit in the attic heats the first floor fine. The exhaust vent seems to be extremely hot. Is it possible the motor that exhausts the cabon monoxide from the gas...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
