Ask Experts Questions for FREE Help !
Ask
    tyler10's Avatar
    tyler10 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 11, 2011, 06:25 PM
    Furnace problem
    Hi got a goodmangmp075-3 furnanc it comes on blower motor working but the heat sensor is not turning red what should I do
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Mar 11, 2011, 10:27 PM
    Check for power goinng to igniter at time its trying to start up,you can also careful look at igniter for any greyish looking cracks, if there replace.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace problem [ 2 Answers ]

Furnace operates fine except during cycle it will shut down then come back on to complete cycle. Could this be the blower relay or something else?

Furnace Problem! [ 0 Answers ]

"We have a concord 80 plus gas furance, sometimes when the furance comes on ignites and within a few seconds it shuts off then it does this a couple more times until the blower shuts off."

Stat problem or furnace problem? [ 1 Answers ]

Need help. Not sure if having problem with stat or furnace. Stat was programmed to 68, and on "Auto", but furnace kept running past 79 and non-stop. I turned off the stat but it still heated up till the circuit was shut off. I left it off for at least an hour then clicked it back on. This solved...

Furnace problem [ 1 Answers ]

I have an Amada 90 gas furnace with a dual stage Aprilaire 6202/6203 control panel, and an Aprilaire thermostat. When I turn on the thermastat for heat, the furnace turns on, the fan starts, the thermocoupler glows, and the burners light. Within about 10 seconds, it all shuts down, and begins the...

Problem with furnace [ 3 Answers ]

Can anyone suggest what's the possible problem with the furnace - it makes a loud clanging noise when the heat first come on and stop right after that.

View more questions Search