Ask Experts Questions for FREE Help !
Ask
    joemontana1's Avatar
    joemontana1 Posts: 0, Reputation: 1
    New Member
    		  
    #1

    Jan 8, 2011, 06:36 PM
    Furnace Problem!
    "We have a concord 80 plus gas furance, sometimes when the furance comes on ignites and within a few seconds it shuts off then it does this a couple more times until the blower shuts off."

Check out some similar questions!

Furnace problem [ 2 Answers ]

Furnace operates fine except during cycle it will shut down then come back on to complete cycle. Could this be the blower relay or something else?

Stat problem or furnace problem? [ 1 Answers ]

Need help. Not sure if having problem with stat or furnace. Stat was programmed to 68, and on "Auto", but furnace kept running past 79 and non-stop. I turned off the stat but it still heated up till the circuit was shut off. I left it off for at least an hour then clicked it back on. This solved...

Furnace problem [ 1 Answers ]

I have an Amada 90 gas furnace with a dual stage Aprilaire 6202/6203 control panel, and an Aprilaire thermostat. When I turn on the thermastat for heat, the furnace turns on, the fan starts, the thermocoupler glows, and the burners light. Within about 10 seconds, it all shuts down, and begins the...

Problem with furnace [ 3 Answers ]

Can anyone suggest what's the possible problem with the furnace - it makes a loud clanging noise when the heat first come on and stop right after that.

Coleman furnace problem [ 1 Answers ]

I have a 1989 Coleman direct vent (sealed combustion system) forced air furnace equipped with standing pilot Model 7665-856 Serial 048272343 This problem only occurs when it is really cold outside. When I need the furnace the most. The furnace starts up normally. Burner turns on then fan...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.