Ask Experts Questions for FREE Help !
Ask
    CherylF69's Avatar
    CherylF69 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 5, 2011, 01:50 PM
    Kenmore #91552210 - Will not spin and is filled with lots of water.
    Hello, I have a Kenmore 91552210 that stopped before the spin cycle and filled with water. The lid is not broken and is closed completely. I hear no timer ticking. I believe the washer is approx, 12-15 yrs old. Please assist in my situation. Thank you , Cheryl
    JimGu's Avatar
    JimGu Posts: 92, Reputation: 4
    Junior Member
    		  
    #2

    Mar 21, 2011, 02:38 PM
    Check the lid switch and the striker on the lid that hits the lid switch. Often we find that the switch looks good but isn't and sometimes this is easy to find out. Unplug the washer and put your fingers down under where the switch is located. Sometimes you can feel that it's busted apart. Failing that, you must lift the control housing and check the switch. Easy to do with a volt/ohmeter or you can jump the two wires together (NOT THE GREEN ONE) and if the washer works then... replace the lid switch. Get back to me and I can give you instructions on that if needed.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore washing machine won't drain water or spin [ 2 Answers ]

:( Hello, I have a kenmore washing machine model #23822100 that is stuck with clothes inside some stale water. When the selector switch is moved to the rinse cycle agitation starts. When it should move to the spin cycle and start draining the water out I hear a series of clicks and then...

Kenmore washer does not spin out or pump out water all the time [ 1 Answers ]

My Kenmore top loading washer model #110.20712990 sometimes does not pump out the water or spin after it does pump it out. I held down the button and it started to spin when I spun the basket by hand. It also is making a squeeking noise now as well as I noticed a "hot" smell just today. Any...

Kenmore Washer sometimes won't spin and drain water [ 2 Answers ]

Kenmore washer model 110.29812890 washes fine and sometimes it spins and drains the water out and sometimes it does not. Would this be the lid switch and if so, can I replace it myself without it being a major pain? I would appreciate any help and guidance if you think it is the lid switch so I...

Kenmore washer still has water after spin cycle [ 1 Answers ]

I have a Kenmore washer 80 series model 110, After the spin cycle finishes there is still some water in the washing machine. We restart the cycle and then all the water is gone. This doesn't always happen, sometimes it works fine. Any ideas would be appreciated

View more questions Search